Practices by Discipline

PIP produces broadly applicable code-compliant practices.

Browse PIP Practices

Review the most up-to-date collection of PIP Practices. Most recently published practices are listed first. Search key terms or filter by discipline to narrow the list.

Found 764 Results

I/E

ELSGS07D

Data Sheet for High-Resistance Grounding System (1 to 5kV) – ELSGS07D was withdrawn in May 2019 and its contents incorporated into ELSGS07.

July 2014
Reaffirmation with Editorial Revision

I/E

ELSGS01D

Data Sheet for High-Resistance Grounding System (600 Volts or Below) – ELSGS01D was withdrawn in May 2019 and its contents incorporated into ELSGS01.

Abstract ↓

This Data Sheet Practice defines minimum requirements for design, fabrication, testing, and documentation of 600-volts class, three-phase, high-resistance grounding systems installed in non-classified areas.

July 2014
Reaffirmation with Editorial Revision

I/E

ELSAP12D

Data Sheet for Valve-Regulated Lead-Acid Batteries – ELSAP12D was withdrawn in May 2019 and its contents incorporated into ELSAP12.

Abstract ↓

This Data Sheet Practice provides requirements for manufacturing valve-regulated lead-acid (VRLA) batteries as discussed in PIP ELSAP12, Data Sheet for Valve-Regulated Lead-Acid Batteries.

June 2014
Complete Revision

I/E

ELSBD01D

Data Sheet For Design and Fabrication of Metal-Enclosed Nonsegregated-Phase Bus Duct Assemblies was withdrawn in September 2020 and its contents incorporated into ELSBD01, Design and Fabrication of Metal-Enclosed Nonsegregated-Phase Bus Duct Assemblies.

Abstract ↓

This data sheet provides requirements for the purchase of metal-enclosed bus duct.

March 2014
Complete Revision

I/E

ELCGL01D

Data Sheet for Electrical Design Criteria was withdrawn in October 2019 and its contents incorporated into ELCGL01 – Electrical Design Criteria.

Abstract ↓

This data sheet describes general requirements and the basis for the design of an electrical system as described in PIP ELCGL01 Ã¢â‚¬â€œ General Design Criteria.

December 2013
Complete Revision

Piping

PLX03CS5S01

Pipeline Systems ASME B31.8 Material Specification, Inside Production Well Site Facility, Class 300, Carbon Steel, 0.03125″ (1/32”) C.A., Sweet, Design Factor 0.6 – PLX03CS5S01 was withdrawn January 2017.

September 2013
New Practice

I/E

ELSSG04D

Data Sheet for Automatic Transfer Systems for Secondary Selective Substations – ELSSG04D was withdrawn in May 2018 and its contents incorporated into ELSSG04.

Abstract ↓

This data sheet describes the requirements for delayed transfer automatic transfer systems (ATS) for two-source secondary selective substations, as discussed in ELSSG04 - Automatic Transfer Systems for Secondary Selective Substations.

September 2013
Complete Revision

Piping

PNSMV066

Miscellaneous Metals Ball Valve Descriptions

Abstract ↓

This document provides the detailed descriptions for the purchase of ball valves included in PIP Piping Line Class Material Specifications.

September 2013
Technical Revision

I/E

ELSMC14D

Low-Voltage Switch Rack Data Sheet – ELSMC14D was withdrawn in January 2019 and its contents incorporated into ELSMC14.

Abstract ↓

This data sheet describes the requirements for outdoor low-voltage switch racks, as discussed in PIP ELSMC14, Low-Voltage Switch Rack Specification.

June 2013
Complete Revision

Piping

PN01NA0B01

Piping Material Specification Class 150, Alloy C2000, Butt Weld, C.A. – None, Process (PTFE Packing/Gaskets) – PN01NA0B01 was withdrawn June 2016.

May 2013
Complete Revision

I/E

ELSMC13D

Data Sheet for Low-Voltage Motor Control Centers – ELSMC13D Data Sheet for Design and Fabrication of Battery Chargers was withdrawn in May 2018 and its contents incorporated into ELSMC13.

Abstract ↓

This Data Sheet describes the requirements for low-voltage motor control centers.

April 2013
Complete Revision

Piping

PNDMV003

Gate Valve Data Sheet and Standard Terms was withdrawn January 2019

Abstract ↓

This Practice provides a data sheet and standard terms used for specifying gate valves. This Practice describes, in table format, the standard terms used in the drop down menus of the PIP gate valve data sheet appended to this Practice.

March 2013
New Practice

Piping

PNDMV004

Globe Valve Data Sheet and Standard Terms was withdrawn January 2019

Abstract ↓

This Practice provides a data sheet and standard terms used for specifying globe valves. This Practice describes, in table format, the standard terms used in the drop down menus of the PIP globe valve data sheet appended to this Practice.

March 2013
New Practice

Piping

PNDMV005

Check Valve Data Sheet and Standard Terms was withdrawn January 2019

Abstract ↓

This Practice provides a data sheet and standard terms used for specifying check valves. This Practice describes, in table format, the standard terms used in the drop down menus of the PIP check valve data sheet appended to this Practice.

March 2013
New Practice

Piping

PNDMV006

Ball Valve Data Sheet and Standard Terms was withdrawn January 2019

Abstract ↓

This Practice provides a data sheet and standard terms used for specifying ball valves. This Practice describes, in table format, the standard terms used in the drop down menus of the PIP ball valve data sheet appended to this Practice.

March 2013
New Practice

Piping

PNDMV007

Butterfly Valve Data Sheet and Standard Terms was withdrawn January 2019

Abstract ↓

This Practice provides a data sheet and standard terms used for specifying butterfly valves. This Practice describes, in table format, the standard terms used in the drop down menus of the PIP butterfly valve data sheet appended to this Practice.

March 2013
New Practice

Piping

PNDMV008

Plug Valve Data Sheet and Standard Terms was withdrawn January 2019

Abstract ↓

This Practice provides a data sheet and standard terms used for specifying plug valves. This Practice describes, in table format, the standard terms used in the drop down menus of the PIP plug valve data sheet appended to this Practice.

March 2013
New Practice

Piping

PNDMV09D

Diaphragm Valve Data Sheet and Standard Terms was withdrawn January 2019

Abstract ↓

This Practice provides a data sheet and standard terms used for specifying diaphragm valves. This Practice describes, in table format, the standard terms used in the drop down menus of the PIP diaphragm valve data sheet appended to this Practice.

March 2013
New Practice

Piping

PNDMV09N

Needle Valve Data Sheet and Standard Terms was withdrawn January 2019

Abstract ↓

This Practice provides a data sheet and standard terms used for specifying needle valves. This Practice describes, in table format, the standard terms used in the drop down menus of the PIP needle valve data sheet appended to this Practice.

March 2013
New Practice

Mechanical

REEE005

Spare Parts Management Guidelines was withdrawn October 2020

Abstract ↓

This Practice provides an objective, methodical process for identifying spare parts needed for life cycle support of rotating equipment.
The intended users of this Practice are:

Persons who evaluate the need and develop recommendations for the acquisition of equipment parts

Business and/or project managers who have the authority and accountability for purchasing parts

This Practice describes the key factors used in identifying spare parts requirements and quantities for rotating equipment. This Practice provides guidelines for identifying needed spare parts, recognizing parts interchangeability opportunities, identifying startup and maintenance parts, establishing locations and levels of parts stocking. This Practice applies to new construction, expansion, or revamp projects; maintenance; and stocking of rotating equipment parts inventory.
Comment: Spare part acquisition at the time of equipment purchase typically results in lower overall pricing.

February 2013
Complete Revision

Date not available
Update type not available

Page 32 of 39

Learn More About PIP Practices

This field is for validation purposes and should be left unchanged.

Name(Required)

First Name Last Name

Company Name(Required)

Work Email Address(Required)

Select the document(s) you’d like to download.(Required)

PIP ADG001 - Specification for Developing Practices

PIP ADG010 - Specification for Numbering Practices

PIP ADG012 - Guideline for Adoption and Implementation of PIP Practices