Login
join
Practices
menu

Browse PIP Practices

Review the most up-to-date collection of PIP Practices. Most recently published practices are listed first. Search key terms or filter by discipline to narrow the list.
Found 606 Results
Icon for I/E
I/E
ELSGS07

Design and Fabrication of High-Resistance Grounding System (2.4kV to 15kV)

Abstract ↓

​This Practice describes the minimum requirements for design, fabrication, testing, and documentation of three-phase, high-resistance grounding systems for use on medium voltage delta or wye systems installed in nonclassified areas.

May 2019
Complete Revision
Icon for CSA
CSA
ARS08390

Blast Resistant Doors, Frames and Related Hardware Specification

Abstract ↓

​This Practice provides supplier with requirements for design, materials, fabrication, finishes, delivery, and installation of blast resistant doors, frames, related hardware, and accessories. This Practice does not include requirements for field-applied finish painting.

March 2019
Technical Revision
Icon for CSA
CSA
STE02465

Augered Cast-in-Place Piles Design Guide

Abstract ↓

This Practice complements PIP STS02465 and assists the engineer in preparation of contract documents for furnishing and installing augered cast-in-place (ACIP) piles.
This Practice is modeled on DFI TM-ACIP-4 (Augered Cast-in-Place Piles Manual). For additional information, refer to that manual, FHWA-HIF-07-03 (Geotechnical Engineering Circular No. 8), DFI TM-ACIP-2 (Augered Cast-in-Place Piles Inspector’s Guide), and DFI TM-ACIP-3 (Guideline for Interpretation of Nondestructive Integrity Testing of Augered Cast-in-Place and Drilled Displacement Piles).


March 2019
Complete Revision
Icon for Mechanical
Mechanical
VEEFG001

Fiberglass Tank and Vessel Design Guidelines

Abstract ↓

​This Practice provides guidelines and describes the design criteria and fiberglass construction methods permitted in ASME/ANSI RTP-1 and Code Section X for fiberglass tanks and vessels. This Practice provides guidance regarding the applications of fiberglass resins and corrosion veil materials and the associated cure systems. This Practice provides guidance regarding site inspections and for the design provisions needed to properly install fiberglass equipment at the site.

March 2019
Technical Revision
Icon for CSA
CSA
CVC01018

Project Data Sheet

Abstract ↓

This Practice provides the Project Data Sheet for compiling and communicating civil/structural/ architectural design data for an individual project.

The Project Data Sheet provides design data for use in conjunction with PIP CVC01015 – Civil Design Criteria, PIP STC01015 – Structural Design Criteria, PIP STE05501 – Fixed Ladders Design Guide, PIP STE05511 – Standard Stairs Design Guide, PIP ARC01015 – Architectural Building Utilities Design Criteria and PIP CVC01017 – Plant Site Data Sheet. The project data may be provided by the owner or developed by the project design team and approved by the owner. Not all information in these documents may be applicable to a specific project. Some information may be applicable to work performed by other disciplines and should, therefore, be issued to all disciplines for their use.


February 2019
Complete Revision
Icon for Mechanical
Mechanical
VESV1002

Design and Fabrication Specification for Vessels ASME Code Section VIII, Divisions 1 and 2

Abstract ↓

This Practice provides design criteria, fabrication, examination, inspection, testing, and documentation requirements for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces {  }.

Supplementary requirements for shell and tube heat exchangers are in PIP VESST002.


January 2019
Complete Revision
Icon for CSA
CSA
CVC01017

Plant Site Data Sheet

Abstract ↓

This Practice provides the Plant Site Data Sheet for compiling and communicating civil/ structural/architectural design data for overall plant facilities.

The Plant Site Data Sheet provides design data for use in conjunction with PIP CVC01015 – Civil Design Criteria, PIP STC01015 – Structural Design Criteria, PIP STE05501 – Fixed Ladders Design Guide, PIP STE05511 – Standard Stairs Design Guide, PIP ARC01015 – Architectural and Building Utilities Design Criteria and PIP CVC01018 – Project Data Sheet. The plant site data should be provided by the owner and communicated to the project team. In the event the owner cannot provide the data, the design professional shall work with the owner to compile and complete the data sheet. Not all information in these documents may be applicable to a specific site. Some information may be applicable to work performed by other disciplines and should, therefore, be issued to all disciplines for their use.


January 2019
Complete Revision
Icon for Mechanical
Mechanical
RESM003

Specification for Mixers and Agitators

Abstract ↓

​This Practice describes the minimum requirements for permanently mounted, top-, bottom-, and side-entering mixers and agitators installed in pressurized or unpressurized vessels, with or without mechanical seals. This Practice does not cover requirements for portable and clamp-on light duty mixers or agitators, in-line mixers, jet-type mixers, or high-speed dispersers.

This Practice includes 2 data forms.

September 2018
Technical Revision
Icon for Data Management
Data Management
DMDIM001

Instrumentation Metadata Requirements

Abstract ↓

​This Practice provides a data modeling framework and defined field identifiers for establishing structured electronic information for process instruments. This Practice provides standardized instrumentation data element labels and associated field identifiers based on common usage, such that instrumentation data can be readily uploaded into various electronic databases. This Practice promotes accurate, timely input of instrument requirements as instrumentation is specified for purchase. Leveraging electronic data management capabilities, the standardized data can be mapped to smart design and maintenance management database systems for ready retrieval and visualization of instrumentation data. This Practice enables single source input which provides the following benefits: 

a. Eliminates duplication of effort for operations and project teams
b. Reduces the cycle time for operations readiness during equipment commissioning
c. Enhances the use of instrument information in daily facility operations, maintenance, and other administration uses

September 2018
Complete Revision
Icon for CSA
CSA
STS05120

Structural and Miscellaneous Steel Fabrication Specification

Abstract ↓

This Practice provides requirements for materials, connections, detailing, fabricating, galvanizing, and delivery of structural and miscellaneous steel.  Structural and miscellaneous steel are as defined in ANSI/AISC 303-16 - Code of Standard Practice for Steel Buildings and Bridges.

This Practice does not include requirements that may be applicable for structures that require special seismic detailing.

August 2018
Complete Revision
Icon for CSA
CSA
STS05130

Structural and Miscellaneous Steel Erection Specification

Abstract ↓

​This Practice provides requirements for receipt, handling, erection, assembly, and field inspection of structural and miscellaneous steel. Structural and miscellaneous steel are as defined in ANSI/AISC 303-16 - Code of Standard Practice for Steel Buildings and Bridges.

August 2018
Complete Revision
Icon for Mechanical
Mechanical
CTCE1000

External Coating System Selection Criteria (Universally Applicable)

Abstract ↓

​This Practice describes the criteria for the selection of industrial coating systems for insulated and uninsulated substrates of structural steel, equipment, vessels, tanks, and piping. This Practice does not include criteria for the selection of industrial coating systems for internal linings, underground substrates, maintenance coating, architectural coatings, or color selection.

August 2018
Technical Revision
Icon for Mechanical
Mechanical
INSH1000

Hot Service Insulation Materials and Installation Specification

Abstract ↓

This Practice provides requirements for materials and installation of hot service insulation systems on the external surfaces of piping and equipment, ambient to 649°C (1200°F).

This Practice describes requirements for hot service insulation materials and accessories, storage and handling of materials, insulation application, extent of insulation, and documentation.

Comment: Use of this Practice for contractual purposes requires the purchaser to make specific choices and to assemble additional supporting documents. Listing of or reference to supporting documents within this Practice does not imply suitability for specific designs.

August 2018
Complete Revision
Icon for I/E
I/E
PCEHP001

Guidelines for Selecting Hygienic Instrumentation

Abstract ↓

​This Practice provides guidelines for selecting instrumentation used in hygienic process applications such as food and pharmaceutical facilities. This Practice includes all types of hygienic instrumentation.  Non-hygienic instrumentation is not covered (e.g., black and gray utilities).

July 2018
New Practice
Icon for Mechanical
Mechanical
CTSU1000

Application of Underground Coatings

Abstract ↓

This Practice provides minimum requirements for surface preparation and the application and inspection of shop-applied and field-applied protective coatings on pipe, vessels, equipment, fittings, flanges, field joints, valves, and special fabrications intended for underground/buried service.

This Practice does not cover external coatings for moderate or severe environments or internal linings for tanks and vessels.

This Practice does not cover in situ continuous coating of pipelines.


July 2018
Editorial Revision
Icon for CSA
CSA
STF05501

Fixed Ladders Fabrication Details

Abstract ↓

​This Practice describes requirements for fabricating typical OSHA-regulated fixed ladders and cages for open structures, miscellaneous platforms, and vessels for regular operational access and egress.

July 2018
Complete Revision
Icon for CSA
CSA
STE05501

Fixed Ladders Design Guide

Abstract ↓

​This Practice provides design guidelines for typical OSHA-regulated fixed ladders, ladder safety systems/personal fall arrest systems and cages as specified and detailed for fabrication in PIP STF05501 for open structures, miscellaneous platforms, and vessels for regular operational access and egress. Typical detail drawings for design are provided that describe ladder and cage details, platform access configurations, support and guide connections, ladder location details, and ladder clearances for side step and through ladder types. The intention of this Practice is to inform structure/platform engineers of OSHA regulations regarding fixed ladders and discuss some practical issues that may arise. Interpretations of the OSHA regulations are the responsibilities of the owner and engineer of record.

July 2018
Complete Revision
Icon for CSA
CSA
CVE02350

Roadway Design Guide (US Customary)

Abstract ↓

​This Practice describes roadway classifications and provides guidance for design of right-of-ways, access to public roadways, use of local materials, climate effects, traffic loading, layout and traffic control, design of paving and roadways, providing drainage, and providing railroad and pipeline crossings for roadways within plant boundaries. This Practice uses United States standards for roadway design. User should research regional standards for variations from this design guide.

July 2018
Complete Revision
Icon for CSA
CSA
CVE02350M

Roadway Design Guide (Metric)

Abstract ↓

​This Practice describes roadway classifications and provides guidance for design of right-of-ways, access to public roadways, use of local materials, climate effects, traffic loading, layout and traffic control, design of paving and roadways, providing drainage, and providing railroad and pipeline crossings for roadways within plant boundaries. This Practice uses United States standards for roadway design. User should research regional standards for variations from this design guide.

July 2018
Complete Revision
Icon for I/E
I/E
ELIGD000

Grounding Installation Details

Abstract ↓

The purpose of this Practice is to provide the typical details for construction of grounding systems in chemical and refining facilities. The bonding and grounding design and installation shall be in accordance with the National Electrical Code.

These installation details include power system and equipment grounding, static grounding protection for equipment in classified locations, grounding electrode connections, and step and touch potential grounding.

Not included in the scope of this Practice are computer and control system grounding and cathodic protection.

June 2018
Complete Revision

Date not available
Update type not available

Learn More About PIP Practices