Practices by Discipline

PIP produces broadly applicable code-compliant practices.

Browse PIP Practices

Review the most up-to-date collection of PIP Practices. Most recently published practices are listed first. Search key terms or filter by discipline to narrow the list.

Found 606 Results

Piping

PN03SA0B01

Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A. – None, Lubricating, Control and Seal Oil

Abstract ↓

Not applicable

March 2022
Complete Revision

Piping

PNSMV026

Stainless Steel Ball Valve Descriptions

Abstract ↓

This Practice provides the detailed purchase descriptions for stainless steel ball valve tag numbers included in PIP Piping Material Specifications (PMSs) and used along with PIP PNSM0110 for the procurement of valves. This Practice also provides a cross reference for stainless steel ball valve tag numbers to applicable PIP Piping Material Specifications.

March 2022
Technical Revision

Mechanical

RESF001

Specification for General Purpose Centrifugal Fans (Universally Applicable)

Abstract ↓

This Practice provides requirements for manufacturing and testing centrifugal fans. This Practice describes manufacturing and performance requirements for single-stage, general purpose centrifugal process, induced draft and forced draft fans in noncritical service. This Practice does not cover fans in services that involve hazardous gases.

March 2022
Technical Revision

I/E

ELEGL03

Guidelines for Power Systems Analysis

Abstract ↓

This Practice provides guidelines for electrical system analysis used to develop and validate electrical power systems performance, including safety and reliability. This Practice does not provide guidance on the type of analysis to be performed for specific applications. The following items are examples of additional studies which are beyond the scope of this Practice: a. Ground grid study b. High voltage substation design analysis c. Insulation coordination studies d. Switching transients e. Flicker f. Telephone Interference Factor (TIF) g. Load shedding h. Motor re-acceleration i. System efficiency

February 2022
Technical Revision

I/E

PCCGN002

General Instrumentation Design Criteria

Abstract ↓

This Practice provides installation criteria for instrumentation. This Practice describes requirements for instrument identification, mounting location, instrument support, process connections, and environmental protection. This Practice does not cover related requirements for the design and installation of instrument piping and tubing which are addressed in PIP PCCIP001 - Instrument Piping and Tubing Systems Criteria. This Practice also does not cover related piping and tubing material specifications which are addressed in PIP PCSIP001 - Instrument Piping and Tubing Systems Specifications. This Practice does not cover related requirements for external grounding or power for instruments which are addressed in Process Industry Practices (PIP) documents under the responsibility of the Electrical Function Team.

February 2022
Technical Revision

Piping

PNCM0001

Piping Material Specification Designator System

Abstract ↓

This Practice describes the arrangement of the PIP Piping Material Specification (PMS) designations and the requirements for each field within a designation. Designation requirements are provided for both PIP-developed and owner-developed piping material specifications. A one-page summary of the PIP PMS Designator System specified in this Practice is provided in Appendix D.

January 2022
Complete Revision

Piping

PN06SK0S01

Piping Material Specification 6SK0S01 Class 600, 321H Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN06SK1S01

Piping Material Specification 6SK1S01 Class 600, 321H Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN09SK0S01

Piping Material Specification 9SK0S01 Class 900, 321H Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN09SK1S01

Piping Material Specification 9SK1S01 Class 900, 321H Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN15SK0S01

Piping Material Specification 15SK0S01 Class 1500, 321H Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN15SK1S01

Piping Material Specification 15SK1S01 Class 1500, 321H Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN01SA0B05

Piping Material Specification 1SA0B05 Class 150, 304/304L Stainless Steel, Butt Weld, C.A.-None, Oxygen Service

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN03SA0B05

Piping Material Specification 3SA0B05 Class 300, 304/304L Stainless Steel, Butt Weld, C.A.-None, Oxygen Service

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN06SA0B05

Piping Material Specification 6SA0B05 Class 600, 304/304L Stainless Steel, Butt Weld, C.A.- None Oxygen

Abstract ↓

Not applicable

January 2022
Complete Revision

Mechanical

VESV1003

Special Fabrication Requirements for Welded Vessels and Tanks to be Lined (Universally Applicable)

Abstract ↓

This Practice describes fabrication requirements for welded vessels, tanks, bins, and silos that are to be lined with nonmetallic linings including liquid-applied and sheet linings. Provisions of this Practice are intended to apply only to surfaces to be lined. This Practice supplements PIP VECV1001, PIP VESV1002, PIP VESSM001 and PIP VESLP001.

January 2022
Technical Revision

Piping

PN50SA0L01

Piping Material Specification 50SA0L01 304/304L Stainless Steel, Tubing Compression, C.A. – None, Process Tubing (thru ASME Class 600 Piping)

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN12PD0H02

Piping Material Specification 12PD0H02 Class SDR-11, High Density Polyethylene (HDPE), Utility (Underground)

Abstract ↓

Not applicable

January 2022
Complete Revision

Piping

PN50SA0L02

Piping Material Specification 50SA0L02, 304/304L Stainless Steel, Tubing Compression, C.A. – None, Process Tubing (thru ASME Class 600 Piping) (PTFE Packing/Gaskets)

Abstract ↓

Not applicable

January 2022
Complete Revision

Mechanical

VESHP001

Hairpin Heat Exchanger Specification

Abstract ↓

This Practice provides requirements for use by a purchaser for determining the design criteria for double-pipe and multitube, and hairpin-type heat exchangers constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Most standardized, predesigned (off-the-shelf) double-pipe and multitube hairpin-type heat exchangers meet the requirements of this Practice.

January 2022
Technical Revision

Date not available
Update type not available

Page 23 of 31

Practices by Discipline

Browse PIP Practices

Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A. – None, Lubricating, Control and Seal Oil

Stainless Steel Ball Valve Descriptions

Specification for General Purpose Centrifugal Fans (Universally Applicable)

Guidelines for Power Systems Analysis

General Instrumentation Design Criteria

Piping Material Specification Designator System

Piping Material Specification 6SK0S01 Class 600, 321H Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Piping Material Specification 6SK1S01 Class 600, 321H Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Piping Material Specification 9SK0S01 Class 900, 321H Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Piping Material Specification 9SK1S01 Class 900, 321H Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Piping Material Specification 15SK0S01 Class 1500, 321H Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Piping Material Specification 15SK1S01 Class 1500, 321H Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Piping Material Specification 1SA0B05 Class 150, 304/304L Stainless Steel, Butt Weld, C.A.-None, Oxygen Service

Piping Material Specification 3SA0B05 Class 300, 304/304L Stainless Steel, Butt Weld, C.A.-None, Oxygen Service

Piping Material Specification 6SA0B05 Class 600, 304/304L Stainless Steel, Butt Weld, C.A.- None Oxygen

Special Fabrication Requirements for Welded Vessels and Tanks to be Lined (Universally Applicable)

Piping Material Specification 50SA0L01 304/304L Stainless Steel, Tubing Compression, C.A. – None, Process Tubing (thru ASME Class 600 Piping)

Piping Material Specification 12PD0H02 Class SDR-11, High Density Polyethylene (HDPE), Utility (Underground)

Piping Material Specification 50SA0L02, 304/304L Stainless Steel, Tubing Compression, C.A. – None, Process Tubing (thru ASME Class 600 Piping) (PTFE Packing/Gaskets)

Hairpin Heat Exchanger Specification

Learn More About PIP Practices