Practices by Discipline

PIP produces broadly applicable code-compliant practices.

Browse PIP Practices

Review the most up-to-date collection of PIP Practices. Most recently published practices are listed first. Search key terms or filter by discipline to narrow the list.

Found 764 Results

I/E

ELSAP15

Design and Fabrication of Flooded-Cell Lead-Acid Batteries for Uninterruptible Power Supplies (UPS)

May 2005
Technical Revision

I/E

ELSAP15D

Data Sheet for Design and Fabrication of Flooded-Cell Lead-Acid Batteries for Uninterruptible Power Supplies (UPS)

May 2005
Technical Correction

Mechanical

RESE003

General Purpose Non-Lubricated Flexible Couplings was withdrawn in April 1988 and its contents incorporated into REEE003.

Abstract ↓

This practice has been replaced by REEE003.

May 2005
Technical Correction

CSA

STE05535

Vessel Circular Platform Detail Guidelines

Abstract ↓

This Practice provides guidance for the engineers who are designing circular platforms in accordance with PIP STF05535, Vessel Circular Platform Details, and for the engineers who design the vessels to support these vessel platforms. It describes the design basis for the platforms detailed in PIP STF05535 and circumstances that should be considered before using PIP STF05535. A table showing the platform design loads for the vessel clips is provided. The table should be used to check whether a vessel requires reinforcement to receive the platform loads.

March 2005
New Practice

CSA

STF05535

Vessel Circular Platform Details

Abstract ↓

This Practice provides fabricators with standard details for circular platforms for vertical vessels. This Practice describes the requirements and the design details for fabrication of circular vessel platforms including ladders and railing. PIP STE05535, Vessel Circular Platform Detail Guidelines, a guide for use by engineers who are providing the circular platforms in accordance with this Practice and for use by engineers who are designing the vessels to support these vessel platforms, is available on the PIP web site or from the PIP office. PIP STE05535 provides information to engineers about the design basis of the platforms, circumstances that should be considered before using this Practice, and a table showing the platform design loads for the vessel clips. Table 1 in PIP STE05535 should be used to check whether the vessel requires reinforcement to receive the platform loads.

March 2005
Complete Revision

CSA

CVC01016

Plant Site and Project Data Sheets Instruction and References – CVC01016 was withdrawn March 2005 and its contents incorporated into CVC01017 and CVC01018

March 2005
New Practice

I/E

ELSGS03

Design and Fabrication of High Resistance Grounding System (Wye System, 2400 Volts)

January 2005
Technical Revision

I/E

ELSGS03D