Practices by Discipline

PIP produces broadly applicable code-compliant practices.

Browse PIP Practices

Review the most up-to-date collection of PIP Practices. Most recently published practices are listed first. Search key terms or filter by discipline to narrow the list.

Found 606 Results

I/E

ELSWC06

Nonshielded Power Cable Specification (2001 Volts to 5000 Volts)

Abstract ↓

This Practice describes the minimum technical requirements for design, material, construction, inspection, testing, purchase, and shipping of single and multiple conductor solid dielectric, insulated, nonshielded copper cable rated at 2001 volts to 5000 volts.

November 2021
Technical Revision

I/E

ELSWC07

Shielded Power Cable Specification (5 to 46 kV)

Abstract ↓

This Practice provides requirements for the purchase of single and multiple conductor shielded power cable rated at 5 kV to 46 kV. This Practice describes the minimum technical requirements for design, material, construction, inspection, testing, and shipping of solid dielectric, insulated shielded copper cable.

November 2021
Technical Revision

Piping

PNSM0115

Purchasing Requirements for Piping and Pipeline Pipe

Abstract ↓

This Practice describes the minimum requirements for the procurement of metallic pipe.

November 2021
Technical Revision

Piping

PNSM0120

Purchasing Requirements for Piping and Pipeline Bolting

Abstract ↓

This Practice describes the minimum requirements for purchasing bolting for piping.

November 2021
Technical Revision

I/E

ELSWC03

Low Voltage Multiconductor Power and Control Cable Specification

Abstract ↓

This Practice provides requirements for low voltage power and control tray cable (Type TC) and metal-clad (Type MC) cable. This Practice describes the minimum technical requirements for fabrication, inspection, testing, and shipping of insulated copper cable. This Practice covers low voltage multiple conductor power and control tray cable and metal-clad cable.

October 2021
Technical Revision

Piping

PN03CS1B01

Piping Material Specification 3CS1B01 Class 300, Carbon Steel, Butt Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

September 2021
Complete Revision

Piping

PN03CS2B01

Piping Material Specification 3CS2B01 Class 300, Carbon Steel, Butt Weld, 0.125” C.A., Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

September 2021
Complete Revision

Piping

PNSM0105

Purchasing Requirements for Piping and Pipeline Gaskets

Abstract ↓

This Practice describes the minimum requirements for gaskets specified in PIP Piping Material Specifications (PMSs). This specification does not cover the purchase of custom gaskets for size ranges or pressure ranges outside the limits of PIP PMSs.

September 2021
Technical Revision

I/E

ELSGL01

Electrical Construction Specification

Abstract ↓

This Practice provides the minimum requirements for construction and installation of electrical power and control systems material and equipment.

September 2021
Technical Revision

I/E

ELCWC08

Electrical Manhole – Cable Vault Design Criteria

Abstract ↓

This Practice describes design criteria for precast concrete manholes or cable vaults used in conjunction with underground electrical ducts, and installation of cables in underground manholes. Proper design and installation of manholes is essential for safety and reliability of plant electrical services. Basic designs and installation requirements included in this Practice shall be reviewed by site engineering personnel for each new installation to ensure proper application.

September 2021
New Practice

I/E

ELSAP04

Uninterruptible Power Supply (UPS) System Specification

Abstract ↓

This Practice and the purchaser’s PIP ELSAP04-D Data Sheet describe the minimum requirements for design, fabrication, inspection, testing, shipment, and documentation for a complete on-line, UPS system of either a pulse width modulated (PWM) or ferroresonant type. A PWM-type UPS system includes a rectifier/charger, inverter, static bypass switch, manual bypass switches, transformers, and accessories. A ferroresonant-type UPS system includes a rectifier/charger, inverter, constant voltage or ferroresonant transformer, static bypass switch, manual bypass switches, transformers, and accessories.

September 2021
Technical Correction

I/E

PCSCV001

Purchasing Requirements for Control Valves

Abstract ↓

This Practice describes the minimum general requirements for the control valve body construction, actuator, auxiliaries (e.g., positioner, limit switches, etc.), testing, inspection, and documentation. This Practice provides requirements for the format for providing data for each individual control valve, the method to be used for valve sizing, and other design considerations. For Control Valves sizing and selection see PIP PCCCV001 and PIP PCECV001.

This Practice does not include requirements for motor-operated valves, on-off valves intended for emergency isolation, and valves with hydraulic actuators. For On-Off Valves, see PIP PCCCV003, Remotely Actuated On-Off Valves Selection Criteria and PIP PCECV003, Guidelines for Application of Remotely Actuated On-Off Valves.

August 2021
Technical Revision

I/E

PCCCV001

Control Valves Selection Criteria

Abstract ↓

This Practice describes requirements for selection and sizing of pneumatically actuated control valves, including requirements for body, bonnet, trim, actuator, accessories, and noise considerations.

This Practice does not cover requirements for motor-operated valves, on-off valves, on-off valves intended for emergency isolation, or valves with hydraulic actuators. For these types of on-off valve applications see PIP PCECV003, Guidelines for Application of Remotely Actuated On-Off Valves.

August 2021
Technical Revision

Piping

PN06SJ0S01

Piping Material Specification 6SJ0S01 Class 600, 321 Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

August 2021
Complete Revision

Piping

PN06SJ1S01

Piping Material Specification 6SJ1S01 Class 600, 321 Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

August 2021
Complete Revision

Piping

PN09SJ0S01

Piping Material Specification 9SJ0S01 Class 900, 321 Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

August 2021
Complete Revision

Piping

PN09SJ1S01

Piping Material Specification 9SJ1S01 Class 900, 321 Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

August 2021
Complete Revision

Piping

PN15SJ0S01

Piping Material Specification 15SJ0S01 Class 1500, 321 Stainless Steel, Socket Weld, C.A. -None, Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

August 2021
Complete Revision

Piping

PN15SJ1S01

Piping Material Specification 15SJ1S01 Class 1500, 321 Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Abstract ↓

Not applicable

August 2021
Complete Revision

I/E

ELTFT02

Induction Motor Electrical Maintenance

Abstract ↓

This Practice covers minimum requirements for the maintenance of induction motors. The aspects of electrical maintenance are described.

While many of the maintenance aspects covered in this Practice can be applied to synchronous and DC motor maintenance, synchronous and DC motor maintenance is not part of this Practice.

July 2021
New Practice

Date not available
Update type not available

Page 25 of 31

Practices by Discipline

Browse PIP Practices

Nonshielded Power Cable Specification (2001 Volts to 5000 Volts)

Shielded Power Cable Specification (5 to 46 kV)

Purchasing Requirements for Piping and Pipeline Pipe

Purchasing Requirements for Piping and Pipeline Bolting

Low Voltage Multiconductor Power and Control Cable Specification

Piping Material Specification 3CS1B01 Class 300, Carbon Steel, Butt Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Piping Material Specification 3CS2B01 Class 300, Carbon Steel, Butt Weld, 0.125” C.A., Elevated Temperature Fluid Service, Process

Purchasing Requirements for Piping and Pipeline Gaskets

Electrical Construction Specification

Electrical Manhole – Cable Vault Design Criteria

Uninterruptible Power Supply (UPS) System Specification

Purchasing Requirements for Control Valves

Control Valves Selection Criteria

Piping Material Specification 6SJ0S01 Class 600, 321 Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Piping Material Specification 6SJ1S01 Class 600, 321 Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Piping Material Specification 9SJ0S01 Class 900, 321 Stainless Steel, Socket Weld, C.A. – None, Elevated Temperature Fluid Service, Process

Piping Material Specification 9SJ1S01 Class 900, 321 Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Piping Material Specification 15SJ0S01 Class 1500, 321 Stainless Steel, Socket Weld, C.A. -None, Elevated Temperature Fluid Service, Process

Piping Material Specification 15SJ1S01 Class 1500, 321 Stainless Steel, Socket Weld, 0.063″ C.A., Elevated Temperature Fluid Service, Process

Induction Motor Electrical Maintenance

Learn More About PIP Practices