Practices by Discipline

PIP produces broadly applicable code-compliant practices.

Browse PIP Practices

Review the most up-to-date collection of PIP Practices. Most recently published practices are listed first. Search key terms or filter by discipline to narrow the list.

Found 606 Results

Mechanical

RFSB2000

Refractory Brick Installation Specification (Universally Applicable)

Abstract ↓

This Practice provides requirements for installation of refractory brick (firebrick) linings. Installation methods include preparation, laying, and repair of the firebrick linings. This Practice also describes requirements for firing firebrick linings, when required.

June 2024
Reaffirmation

Piping

PNCM0004

Valve Tag Number Designator System

Abstract ↓

This Practice describes the arrangement of PIP valve tag number designations for manually operated valves and requirements for each field within a designation. Designation requirements are provided for both PIP-developed and purchaser developed valve tag numbers.

June 2024
Technical Revision

Process

PHSMV026

Hygienic Process for Food/Beverage/Consumer & CGMP Products Stainless Steel Ball Valve Descriptions

Abstract ↓

This Practice provides requirements for suppliers providing hygienic stainless steel ball valves included in PIP Piping Line Class Material Specifications. For the purposes of this practice, “Hygienic,” “Process,” or “Hygienic Process” refers to all Hygienic Processes for Food/Beverage/Consumer & Current Good Manufacturing Practices (CGMP) or other products requiring a clean design. Ball valves are most often used in utility systems, such as clean gas flow, steam, water, etc., that support hygienic processes; however, it is highly recommended to avoid use of ball valves in the hygienic process. If necessary, it is recommended that any product contact ball valves are designated as “Clean Out of Place (COP)” to prevent cross contamination between products and batches.

June 2024
Technical Revision

Process

PHSMV025

Hygienic Process for Food/Beverage/Consumer & CGMP Products Stainless Steel Check Valve Descriptions

Abstract ↓

This Practice provides requirements for suppliers providing hygienic stainless steel check valves included in PIP Piping Line Class Material Specifications. For the purposes of this practice, “Hygienic,” “Process,” or “Hygienic Process” refers to all Hygienic Processes for Food/Beverage/Consumer & Current Good Manufacturing Practices (CGMP) or other products requiring a clean design.

June 2024
Technical Revision

Piping

PNC00002

Abbreviated Piping Terms and Acronyms

Abstract ↓

This Practice provides a system for engineers to identify abbreviated piping terms and acronyms used in PIP piping Practices. This Practice establishes the definitions and interpretations for all piping-related abbreviations and acronyms used in piping Practices. Abbreviations for technical societies, codes, standards, etc., are not included.

June 2024
Technical Revision

Piping

PLSC0018

Requirements for Welder Qualifications in Accordance with API 1104

Abstract ↓

This Practice provides minimum requirements for qualifying welders in accordance with API 1104. Welder qualification tests are given to determine the ability of the welder to make sound welds using qualified weld procedures (WPS). For welder qualification requirements in accordance with ASME Section IX, see PIP PLSC0017.

May 2024
Technical Revision

Piping

PLX01CS1S01

Pipeline Systems ASME B31.8 Material Specification 1CS1S01, Class 150, Carbon Steel, 0.0625” (1/16”) C.A., Sour*, Design Factor = 0.6

Abstract ↓

May 2024
Complete Revision

Piping

PLX03CS1S01

Pipeline Systems ASME B31.8 Material Specification 3CS1S01, Class 300, Carbon Steel, 0.0625” (1/16”) C.A., Sour*, Design Factor = 0.6

Abstract ↓

May 2024
Complete Revision

Piping

PLX06CS1S01

Pipeline Systems ASME B31.8 Material Specification 6CS1S01, Class 600, Carbon Steel, 0.063” (1/16”) C.A., Sour*, Design Factor = 0.6

Abstract ↓

May 2024
Complete Revision

Piping

PLX09CS1S01

Pipeline Systems ASME B31.8 Material Specification 9CS1S01, Class 900, Carbon Steel, 0.063” (1/16”) C.A., Sour*, Design Factor = 0.6

Abstract ↓

May 2024
Complete Revision

Piping

PLX15CS1S01

Pipeline Systems ASME B31.8 Material Specification 15CS1S01, Class 1500, Carbon Steel, 0.063” (1/16”) C.A., Sour*, Design Factor = 0.6

Abstract ↓

May 2024
Complete Revision

Process

PH000BK0U01

Piping Material Specification 000BK0U01 Copper Tubing, C.A.-None, Nonflammable Medical Gas Systems, Mill ID Finish, Mill OD Finish, PTFE Seals/Seats, Brazed Joint Construction

Abstract ↓

Not applicable

May 2024
Complete Revision

Process

PHXP0PK0H01

Hygienic Process for Food/Beverage/Consumer & CGMP Products Material Specification XP0PK0H01 High Purity PVDF Pipe,C.A. – None, Butt Fusion Welded, SFP1ID Finish ≤ 10″, SFP2ID Finish ≥ 12″, PTFE Seals/Seats (Universally Applicable)

Abstract ↓

Not applicable

May 2024
Complete Revision

Mechanical

VEFV1100

Vessel/Shell & Tube Heat Exchanger Standard Details (U.S. Customary Units) (Universally Applicable)

Abstract ↓

This Practice provides fabrication and installation details and dimensional tolerances for the design of supports and other attachments for vessels, heat exchangers and solids products containers.

May 2024
Complete Revision

Mechanical

VEFV1100M

Vessel/Shell & Tube Heat Exchanger Standard Details (Metric Units) (Universally Applicable)

Abstract ↓

This Practice provides fabrication and installation details and dimensional tolerances for the design of supports and other attachments for vessels, heat exchangers and solids products containers. Dimensions are conversion of the PIP VESV1100 dimensions using the conversion guidelines of ASME Section VIII, Appendix GG.

May 2024
Complete Revision

I/E

ELSSG04

Automatic Transfer Systems for Secondary Selective Substations

Abstract ↓

This Practice describes minimum requirements for design, performance, inspection, testing, and documentation of automatic delayed transfer systems (ATS) for two-source secondary selective substations, typically known as Main-Tie-Main transfer scheme. ATS provides automatic restoration of bus voltage upon loss of one of the sources. This Practice also covers remote monitoring and control requirements. This Practice does not cover fast bus transfer or delayed in-phase transfer systems.

May 2024
Complete Revision

Process

PHCM0004

Hygienic Process Valve Tag Number Designator System (Universally Applicable)

Abstract ↓

This Practice provides the arrangement of PIP valve tag number designations for manually operated valves in hygienic service and requirements for each field within a designation. Designation requirements are provided for both PIP-developed and purchaser-developed valve tag numbers.

May 2024
Technical Revision

I/E

ELSPF01

Medium-Voltage Metal-Enclosed Power Factor Correction Capacitor Specification from 2.4 kV to 35 kV

Abstract ↓

This Practice provides minimum requirements for design, fabrication, inspection, testing, shipment, and documentation, for metal-enclosed power factor correction capacitors, from 2.4 kV to 35 kV, containing lightning/surge arrestor, transient inrush or tuning reactors, vacuum circuit breaker, capacitor, capacitor protection, insulated buses, and control for indoor/outdoor installation in unclassified areas. This Practice covers fixed, manual, and automatic switched capacitor banks.

May 2024
Technical Revision

Piping

PLSMV005

Carbon Steel Check Valve Descriptions

Abstract ↓

This Practice provides requirements for suppliers providing carbon steel check valves included in PIP Pipeline Systems Material Specifications (PMSs).

May 2024
Technical Correction

Piping

PLSMV008

Carbon Steel Plug Valve Descriptions

Abstract ↓

This Practice provides requirements for suppliers providing carbon steel plug valves included in PIP Pipeline Systems Material Specifications (PMSs).

May 2024
Technical Correction

Date not available
Update type not available

Page 12 of 31

Practices by Discipline

Browse PIP Practices

Refractory Brick Installation Specification (Universally Applicable)

Valve Tag Number Designator System

Hygienic Process for Food/Beverage/Consumer & CGMP Products Stainless Steel Ball Valve Descriptions

Hygienic Process for Food/Beverage/Consumer & CGMP Products Stainless Steel Check Valve Descriptions

Abbreviated Piping Terms and Acronyms

Requirements for Welder Qualifications in Accordance with API 1104

Pipeline Systems ASME B31.8 Material Specification 1CS1S01, Class 150, Carbon Steel, 0.0625” (1/16”) C.A., Sour*, Design Factor = 0.6

Pipeline Systems ASME B31.8 Material Specification 3CS1S01, Class 300, Carbon Steel, 0.0625” (1/16”) C.A., Sour*, Design Factor = 0.6

Pipeline Systems ASME B31.8 Material Specification 6CS1S01, Class 600, Carbon Steel, 0.063” (1/16”) C.A., Sour*, Design Factor = 0.6

Pipeline Systems ASME B31.8 Material Specification 9CS1S01, Class 900, Carbon Steel, 0.063” (1/16”) C.A., Sour*, Design Factor = 0.6

Pipeline Systems ASME B31.8 Material Specification 15CS1S01, Class 1500, Carbon Steel, 0.063” (1/16”) C.A., Sour*, Design Factor = 0.6

Piping Material Specification 000BK0U01 Copper Tubing, C.A.-None, Nonflammable Medical Gas Systems, Mill ID Finish, Mill OD Finish, PTFE Seals/Seats, Brazed Joint Construction

Hygienic Process for Food/Beverage/Consumer & CGMP Products Material Specification XP0PK0H01 High Purity PVDF Pipe,C.A. – None, Butt Fusion Welded, SFP1ID Finish ≤ 10″, SFP2ID Finish ≥ 12″, PTFE Seals/Seats (Universally Applicable)

Vessel/Shell & Tube Heat Exchanger Standard Details (U.S. Customary Units) (Universally Applicable)

Vessel/Shell & Tube Heat Exchanger Standard Details (Metric Units) (Universally Applicable)

Automatic Transfer Systems for Secondary Selective Substations

Hygienic Process Valve Tag Number Designator System (Universally Applicable)

Medium-Voltage Metal-Enclosed Power Factor Correction Capacitor Specification from 2.4 kV to 35 kV

Carbon Steel Check Valve Descriptions

Carbon Steel Plug Valve Descriptions

Learn More About PIP Practices